EKF - Short Profile
EKF - Short Profile


C47-MSATA

Dual mSATA Low Profile Mezzanine Storage Module

HTML documents available here


C47-MSATA

Description

Ordered List

Suitable CPU Carrier Cards

PC4 | PC5 | PC6 | PCS | SC2 | SC3 | SC4 | SC5


C47-MSATA Dual mSATA Low Profile Mezzanine Storage Module
PDF documents available here

C47-MSATA

Technical Information

Block Diagram

General Information

C4x Series Overview

Alternate Low Profile Mezzanine Modules

C40 | C41 | C42 | C43 | C48

Alternate Mezzanine Side Boards
Additional 4HP Assembly Height

C23 | C32 | C44 | C45 | CCI | CCK | CCL | CCO | PCL | PCS | SCS

Download area for drivers

SATA Drivers


PC3 | PC4 | PC5 | PC6 | PCS | SC2 | SC3 | SC4 | SC5

Download a photo in print quality C47-MSATA Photo Gallery

1 | 2 | 3 | 4 | 5 | 6
Alternate Low Profile Storage Modules

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17
Side Boards

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 Print Quality 300dpi 10x15cm .JPG ©EKF
If setup for non-tabbed browsing, images are displayed in a secondary browser window

C47-MSATA

Dual mSATA Card Low Profile Mezzanine Storage Module


Available as a mezzanine add-on expansion board to the CCM-BOOGIE, PC1-GROOVE and other CPU carrier cards, the main purpose of the C47-MSATA is to provide dual host connectors for mounting of mSATA SSD modules, as a rugged and fast mass storage media. With both sockets in use, a SATA RAID level 0/1 system can be easily established, for even higher performance and reliability.


MSATA host connectors are mechanically identical to the PCI Express® Mini Card specification. With respect to the signal routing, the C47-SATA allows also for use of USB bound PCI Express® Mini Card modules, as an alternate to mSATA SSDs. Such Mini Card modules which need support for a PCI Express® lane cannot be used with the C47-SATA.

C47-MSATA - The Fast and Rugged SATA RAID Mezzanine Storage Solution

C47-MSATA - The Fast and Rugged SATA RAID Mezzanine Storage Solution


Basically, the C47-MSATA is designed to fit into the 4HP (20.32mm) envelope of a CompactPCI® CPU carrier board, so that another 4HP pitch mezzanine expansion board may be stacked above the CPU/C47 assembly in addition. The C47-MSATA accommodates either full-size (50.8mm length, fixed by latch) or mini-size (26.8mm length, screw lock) mSATA modules.


The C47-MSATA can be optionally equipped with one ore two USB 2.0 type A receptacles. In addition, up to two SATA connectors (latching headers) are optionally available on the C47-MSATA, for attachment of system internal drives. However, both cable connector options would exceed the 4HP total stack height for the CPU carrier board and C47-MSATA assembly.

C47-MSATA Low Profile Module Mounted on a CPU Carrier Card

C47-MSATA Low Profile Module Mounted on a CPU Carrier Card

C47-MSATA Block Diagram

C47-MSATA Block Diagram

C47-MSATA Mezzanine over CPU Carrier Card

C47-MSATA Mezzanine over CPU Carrier Card
Feature Summary
Form Factor Proprietary size mezzanine module, fits basically into the 4HP (20.3mm) envelope of the CPU carrier board, typically delivered as a ready to use assembly unit (including the CCM-BOOGIE, PC1-GROOVE or similarr CPU card), mounting position right (on top of CPU board)
Host I/F Connector (Bottom Mount to CPU Carrier)
  • High Speed mezzanine connector suitable for CCM-BOOGIE, PC1-GROOVE and successor CPU carrier boards
  • up to 4 x SATA 3G channels (RAID option)
  • 4 x USB 2.0 ports
  • 1.6 A maximum continuous current via 3.3V rail
SATA Usage
  • SATA1 (from ICH southbridge or PCH on CPU carrier board), bound to the optional internal cable connector SATA1, please note that additional headroom is required beyond 4HP for this option
  • SATA2 and SATA3 (derived from the CPU carrier board secondary SATA controller), bound to the mSATA module connectors PEMC1 and PEMC2, both channels operated either individually or as SATA RAID level 0/1 dual drive
  • SATA4 (not supported on all CPU carrier boards), bound to the optional internal cable connector SATA4, option not available together with dual mSATA module sockets, please note that additional headroom is required beyond 4HP for this option
USB Usage
  • USB1 & USB2 dedicated to optional USB type A cable connectors. Receptacle USB2 not available together with dual mSATA module sockets. Please note that additional headroom is required beyond 4HP for USB cable connectors.
  • USB3 & USB4 wired to mSATA sockets PEMC1/PEMC2 for use with USB bound PCI Express® Mini Card modules
mSATA Connectors
  • Up to 2 x sockets (PEMC1, PEMC2), mechanically identical to the PCI Express® Mini Card specification, suitable for mSATA modules complying with JEDEC MO-300B, or USB 2.0 based PE Mini Cards according to the PCI-SIG specification
  • Module size full (50.8mm x 29.85mm x 3.75mm) or mini (26.8mm)
  • SIM card holder available as an option, assigned to PEMC1
  • 1.6 A maximum continuous current via 3.3V rail (in total for both sockets together)
Cable Connectors
  • SATA1 (option), SATA4 (option), for attachment of system internal SATA drives
  • USB1 (option), USB2 (option), for system internal attachment of USB devices
Thermal Conditions

Environmental Conditions

Specials

  • Operating temperature: -40°C ... +85°C (depends on mSATA modules in use)
  • Storage temperature: -40°C ... +85°C, max. gradient 5°C/min
  • Humidity 5% ... 95% RH non condensing
  • Altitude -300m ... +3000m
  • Shock 15g 0.33ms, 6g 6ms
  • Vibration 1g 5-2000Hz
  • RoHS compliant
  • Coating, Sealing, Underfilling on request
  • Long Term Availability
EC Regulations
  • EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)
  • 2002/95/EC (RoHS)
Ordering Information
Please refer to List 20 for popular C47-MSATA SKUs

C47-MSATA Module Mounted on a CPU Carrier Card (Front View)

C47-MSATA Module Mounted on a CPU Carrier Card (Front View)


C47-MSATA Module Mounted on a CPU Side Card

C47-MSATA Module Mounted on the CPU Side Card PCS-BALLET

EKF is an ISO-9001 certified company
EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 Hamm • Germany
Phone +49 (0)2381/6890-0 • Fax +49 (0)2381/6890-90 • E-Mail